Integrator
The Integrator (INT) sums up a numeric tag over time into a total quantity. This turns an instantaneous value such as a flow rate or a power into a meter reading, e.g. m³/h into a volume in m³ or kW into an energy in kWh.
Function parameters
| Source | Numeric tag that is summed up. The value must refer to one hour (e.g. m³/h or kW). |
How it works
The current value of the source is considered valid until a new value arrives. For each time segment, the value is multiplied by its duration and added to the meter reading.
Set or reset the meter reading
The meter reading can be set or reset at any time, e.g. after maintenance has been carried out. Use the Tag Display Vizual with input enabled for this purpose.